I use high quality vinyl that will last for quite a few years depending on application and weather if applied outdoors. If applying decals to cups, water bottles or mugs, etc. Hand wash only.

Vinyl Decal Application Instructions

Dry Method - Best for Flat Surfaces

1 Clean with rubbing alcohol and dry the application area. Make sure to remove any dirt, oil or wax.

2 Remove the paper backing slowly making sure the decal stays adhered to the transparent transfer tape.

3 Carefully position the decal to the desired area. Once the decal sticks it will be nearly impossible to reposition without destroying the decal. Rub the decal from one side to the other, eliminating any air bubbles.

4 Use a hard edged object like a credit card to make sure the entire decal is fully adhered to the surface.

5 Slowly remove the transfer tape. Making sure no part of the decal remains on the transfer tape.

6 Check for air bubbles. In most cases air bubbles can be worked to the edge of the decal, but if not, a pinhole will allow the air out and become virtually invisible, once the bubble is gone.

Removal Instructions

● From Glass - Scrape off with a razor blade.

● From Paint or Plastic - Heat gently with a hair dryer until decal pulls off easily.

● Adhesive residue can be wiped off with Mineral Spirits.